Red push is a accentuation of reds for the purpose of making flesh tones more attractive although not necessarily more correct. It is usually accomplished by designing of the color decoder to not conform strictly with the video standards and as a result it usually cannot be eliminated.

Answered by Shobhit , an ibibo Master, at 5:58 PM on May 09, 2008

It is usually accomplished by designing of the color decoder to not conform strictly with the video standards and as a result it usually cannot be eliminated.

Answered by Ashish Yadav , an ibibo Wizard, at 6:55 PM on May 08, 2008

tendenc y of colour decoder in many tvs to accentuate the colour of red compared to blue and green.red push is typically introduced intentionally to compensate for an overly blue colour temperature.

Answered by aliasgar , an ibibo Master, at 5:07 PM on May 04, 2008

Red push refers to the tendency of a television's color decoder to accentuate the color of red as compared to blue and green.

Regards,
http://www.heen amehta.com/

Answered by RushON , an ibibo Citizen, at 3:21 PM on May 04, 2008

reds are acentuated to make flesh tones more attractive. It is mostly done by designing of the color decoder to not confirm with the video standards and as a result it cannot be eliminated.

Answered by a banerji , an ibibo Master, at 12:39 AM on May 04, 2008

almost all tvs (with the possible exception of higher end computer monitor-type tvs) don't allow user level control of the individual color levels. Some people have found ways on some sets to alleviate red push via the service menu but normally, all one's user level menu system allows one to change is overall color saturation and overall tint. So, if one has calibrated the set's color and tint using the Avia blue filter, one can then look at the color decoder test pattern and see how much more red is being emphasized by the sets color decoder. When you look at this pattern, blue should be around 0 percent. If the set has a nice color balance then green and red will also be around 0 percent. When red is up over 10 percent, this is what people call "red push".

Answered by jaivir , an ibibo Master, at 6:14 PM on May 01, 2008

well kajol, Refers to the tendency of a television's color decoder to accentuate the color of red as compared to blue and green,Tendency of the color decoder in many TVs to accentuate the color of red compared to blue and green. Red push is typically introduced intentionally to compensate for an overly blue color temperature.

Answered by satyaiitk , an ibibo Master, at 4:07 PM on May 01, 2008

Accentuation of reds for the purpose of making flesh tones more attractive although not necessarily more correct. It is usually accomplished by designing of the color decoder to not conform strictly with the video standards and as a result it usually cannot be eliminated.

Answered by ajay bhutani , an ibibo Citizen, at 3:06 PM on May 01, 2008

it is tendency of a television's color decoder to accentuate the color of red as compared to blue and green.

Answered by Manju Jain , an ibibo Citizen, at 10:05 PM on April 30, 2008

Refers to the tendency of a television's color decoder to accentuate the color of red as compared to blue and green.

Answered by ruchi arora , an ibibo Advisor, at 9:54 PM on April 30, 2008