Results 1 - 15 of about 11859 sawaal for "typical"
What do the CAT ratings mean for network cable?The CAT rating tell you the frequency rating of the cable. Additionally it can give you an idea of the typical use for it.Types:CAT 1. Lowest grade of cable. No Frequency rating. 1MbsTypical use: Alarm systems, Intercom Systems.CAT 2. Typical phone cable. Frequency max: 1mhz 4MbpsTypical use: Phone systems.CAT 3. Typical 10base-T cable. Frequency max
Posted in
Computers & Technology by lucky at 11:51 PM on May 22, 2008
typical solderless breadboard is made up from two types of areas, called strips.Strips consist of interconnected electrical terminals.To provide power to the electronic components.A bus strip usually-column power distributions bus strip on each long side. Typically the column intended for a supply voltage is marked in red, while the column for ground is marked in blue or black. Some manufacturers connect all
Posted in
Computers & Technology by Anju Singh at 12:47 PM on June 05, 2008
hello anju the typical specifications include Typical specificationsA modern solderless breadboard consists of a perforated block of plastic with numerous tin plated phosphor bronze spring clips under the perforations. The spacing between the clips lead pitch is typically 0.1" 2.54 mm. Integrated circuits ICs in dual in-line packages DIPs can be inserted to straddle the centerline
Posted in
Computers & Technology by Anju Singh at 12:46 PM on June 05, 2008
is then decoded by the receiver to recover the original sound.Each AM channel is assigned a range of frequencies, typically about 10 kHz wide. The common frequency identification such as AM 1190 for America AM 1190 bandwidth of an AM channel is typically about 5 kHz. The musical range of the human ear is about 20 kHz, and that is the reason why AM sounds imperfect....there is the AM band of frequencies
Posted in
Computers & Technology by Nawraj at 6:32 AM on June 25, 2008
file also can contain instructions for configuring operating system settings and installing applications without user intervention.After you configure your answer file, you typically create a.A distribution share uses a hierarchical folder structure that is similar to the one used on computers running Windows Server 2003 or Windows XP Professional, and is typically stored on a server to which your
Posted in
Computers & Technology by bil ghost at 6:21 PM on July 03, 2008
that the user wishes to perform. This should be contrasted with system software which is involved in integrating a computers various capabilities, but typically does not directly apply them in the performance to a task that the user wishes to perform. This should be contrasted with system software which is involved in integrating a computers various capabilities, but typically does not directly apply them
Posted in
Computers & Technology by saurabh at 4:48 AM on October 03, 2008
hello anju terminal strip is The main area. To hold the electronic components. In the middle of a terminal breadboard strip, one typically finds a notch running in parallel to the long side, typically five clips in a row on each side of the notch are electrically connected. The five clip columns on the left of the notch are often marked as A, B, C, D, and E, while the ones on the right are marked
Posted in
Computers & Technology by Anju Singh at 12:48 PM on June 05, 2008
the laser action.In solid state lasers, an electrical current pumps electrons into the laser medium - typically a semiconductor - exciting electrons that are fixed in the medium. Driven into higher energy-are-the-different-types-of- laser s.htm...well, There are three types of lasers: solid state, gas and liquid.In solid state lasers, an electrical current pumps electrons into the laser medium - typically a semiconductor - exciting
Posted in
Computers & Technology by Aryan Gusain at 6:24 PM on July 01, 2008
.ESD device coupled to ground is designed to act in the presence of a high voltage event at the pin to bring the associated current to ground rather than exposing such event to the part IC.The typical ESD device is the diode, including a diode connected transistor e.g., NPN transistor, with one diode from device ground to the device pin.Assembly 100 includes part IC 130 having pin 110 typically a plurality
Posted in
Computers & Technology by ramesh at 1:39 AM on June 05, 2008
may emerge. For non-commercial web sites, the goals may vary depending on the desired exposure and response. For typical commercial web sites, the basic aspects of design are:The content: the substance interfaces GUIs.Sam typically web pages are classified as static or dynamic.There are many aspects design concerns in this process, and due to the rapid development of the Internet, new aspects may emerge
Posted in
Computers & Technology by sam anyu at 12:06 AM on June 05, 2008
exposing such event to the part IC. The typical ESD device is the diode, including a diode connected transistor e.g., NPN transistor, with one diode from device ground to the device pin. According to one such event to the part IC. The typical ESD device is the diode, including a diode connected transistor e.g., NPN transistor, with one diode from device ground to the device pin.Assembly 100 includes part IC
Posted in
Computers & Technology by ramesh at 1:43 AM on June 05, 2008
are normally arranged in a regular 2-dimensional grid, and are often represented using dots or squares. Each pixel is a sample of an original image, where more samples typically provide a more accurate representation of the original.The intensity of each pixel is variable; in color systems, each pixel has typically three or four components such as red, green, and blue, or cyan, magenta, yellow, and black
Posted in
Computers & Technology by lovely monu at 4:06 AM on July 15, 2008
-byte file contains zero bytes.Zero-byte files are typically created when a file transfer does not complete successfully. This may happen when a file is downloaded via the Web or an FTP client, or when an e, the aptly named zero-byte file contains zero bytes.Zero-byte files are typically created when a file transfer does not complete successfully. This may happen when a file is downloaded via the Web or an FTP
Posted in
Computers & Technology by mahesh jha at 10:42 PM on June 23, 2008
exposing such event to the part IC. The typical ESD device is the diode, including a diode connected transistor e.g., NPN transistor, with one diode from device ground to the device pin.Assembly 100 includes part IC 130 having pin 110 typically a plurality of pins for coupling part IC 130 to a package. Between part device 130 and pin 110 is ESD device 120. With this configuration, a high voltage event at pin
Posted in
Computers & Technology by ramesh at 1:37 AM on June 05, 2008
Tags are usually chosen informally and personally by item author/creator or by its consumer/viewers/community.T ags are typically used for resources such as computer files, web pages, digital images the purpose of the page by quickly scanning the list of tags. Typically, the server would display the tags in a list on that page, with each tag displayed as a web link leading to an index page listing all web
Posted in
Computers & Technology by shinto e l at 4:04 PM on May 22, 2008
