Asked in Computers & Technology at 11:04 AM on November 05, 2009
Tags: cable, connect, router, computer
lan wire
Answered by kanika m , an ibibo Citizen, at 2:46 PM on November 05, 2009
with an Ethernet straight-thru cable. If there is no uplink port on the switch, then connect any of its PC ports to a PC port on the router with a crossover cable instead. Many newer switches use auto-sensing ports and switches.Connect the switchs uplink port to a PC port on the router with a straight-thru cable. If the switch does not have an uplink port, connect one of its PC ports to a PC port on the router with a
wireless router, you can either connect computers and printers in your network using Ethernet cables or wireless signals. Wireless routers typically provide 30 meter coverage in all directions. Of course/wireless.mspx...First to begin setting up your wireless network, you will need a few pieces of hardware like : A wireless router One wireless network adapter for each computer A cable or DSL broadband modem if you wish to connect
MPLS[5...]. Residential gateways often called routers are frequently used in homes to connect to a broadband service, such as IP over cable or DSL. A home router may allow connectivity to an enterprise/cisco/cisco.htm...well, In certain environments where a non-Cisco cable modem CM is used, and the CM is only capable of bridging, a Cisco router, such as the Cisco 806, can be connected to the CM via the Ethernet interface
adapter5. Connect the other end of the network cable to your modem...There are 4 steps to creating a wireless network:1.Choose your wireless equipment2.Connect your wireless router3.Configure your wireless. Then click Turn Off.4. Connect the network cable supplied by your ISP to your network adapter5. Connect the other end of the network cable to your modem...hello Gopi You need to find the address of your router
with an asynchronous transfer mode ATM network. A brouter is a network bridge combined with a router.For home and business computer users who have high-speed Internet connections such as cable, satellite, or DSL, a and business computer users who have high-speed Internet connections such as cable, satellite, or DSL, a router can act as a hardware firewall. This is true even if the home or business has only one computer
Help us avoid spam Enter characters as shown above
Want an Answer Alert? Enter your email
Categories
View All
