What is CDMA? 

Code division multiple access (CDMA) is completely different from AMPS, DMPS and GSM. Instead of dividing the allowed frequency range into a few hundred narrow channels CDMA allows each station to transmit over the entire frequency spectrum all the time. Multiple simultaneous transmissions are separated using coding theory. CDMA also relaxes the assumption that colliding frames are totally garbled. Instead, it assumes that multiple signals add linearly.

Answered by nisha at 5:11 PM on November 13, 2007

Code division multiple access (CDMA) describes a communication channel access principle that employs spread-spectrum technology and a special coding scheme (where each transmitter is assigned a code). In communications technology, there are only three domains that can allow multiplexing to be implemented for more efficient use of the available channel bandwidth and these domains are known as time, frequency and space. CDMA divides the access in signal space. By contrast, time division multiple access (TDMA) divides access by time, while frequency-division multiple access (FDMA) divides it by frequency. CDMA is a form of "spread-spectrum" signaling, since the modulated coded signal has a much higher bandwidth than the data being communicated. An analogy to the problem of multiple access is a room (channel) in which people wish to communicate with each other. To avoid confusion, people could take turns speaking (time division), speak at different pitches (frequency division), or speak in different directions (spatial division). In CDMA, they would speak different languages. People speaking the same language can understand each other, but not other people. Similarly, in radio CDMA, each group of users is given a shared code. Many codes occupy the same channel, but only users associated with a particular code can understand each other. CDMA is also the current name for the cellular technology originally known as IS-95. Developed by Qualcomm and enhanced by Ericsson, CDMA is characterized by high capacity and small cell radius. CDMA also refers to digital cellular telephony systems that use this multiple access scheme, as pioneered by QUALCOMM, and W-CDMA by the International Telecommunication Union (ITU), which is used in GSM’s UMTS. CDMA has been used in many communications and navigation systems, including the Global Positioning System and the OmniTRACS satellite system for transportation logistics.The terms are used to refer to CDMA implementations. The original US standard defined by QUALCOMM was known as IS-95, where IS refers to an Interim Standard of the US Telecommunications Industry Association. IS-95 is often referred to as the second generation (2G) cellular, or as cdmaOne (the QUALCOMM brand name). CDMA has been submitted for approval as a mobile air interface standard to the International Telecommunication Union (ITU). Whereas Global System for Mobile Communications (GSM) is a specification of an entire network infrastructure, CDMA relates only to the air interface — the radio portion of the technology. For example, GSM specifies an infrastructure based on internationally approved standard, while CDMA allows each operator to provide network features it finds suitable. On the air interface, the signalling suite (GSM: ISDN SS7) work has been progressing to harmonise these features.

Answered by Praveen at 3:42 PM on November 13, 2007

Code division multiple access (CDMA) describes a communication channel access principle that employs spread-spectrum technology and a special coding scheme (where each transmitter is assigned a code). In communications technology, there are only three domains that can allow multiplexing to be implemented for more efficient use of the available channel bandwidth and these domains are known as time, frequency and space. CDMA divides the access in signal space. By contrast, time division multiple access (TDMA) divides access by time, while frequency-division multiple access (FDMA) divides it by frequency. CDMA is a form of "spread-spectrum" signaling, since the modulated coded signal has a much higher bandwidth than the data being communicated

Answered by Raghu at 12:50 PM on November 13, 2007

CDMA which stands for Code Division Multiple Access is a digital wireless telephony transmission technique. CDMA allows multiple frequencies to be used simultaneously (Spread Spectrum). The CDMA idea was originally developed for military use over 30 years ago. The CDMA standards used for second-generation mobile telephony are the IS-95 standards championed by QUALCOMM.

Answered by @ at 11:29 AM on November 13, 2007

Code division multiple access (CDMA) describes a communication channel access principle that employs spread-spectrum technology and a special coding scheme (where each transmitter is assigned a code). In communications technology, there are only three domains that can allow multiplexing to be implemented for more efficient use of the available channel bandwidth and these domains are known as time, frequency and space. CDMA divides the access in signal space. By contrast, time division multiple access (TDMA) divides access by time, while frequency-division multiple access (FDMA) divides it by frequency. CDMA is a form of "spread-spectrum" signaling, since the modulated coded signal has a much higher bandwidth than the data being communicated.

Answered by quadeer at 10:44 AM on November 13, 2007

CDMA (Code-Division Multiple Access) refers to any of several protocols used in so-called second-generation (2G) and third-generation (3G) wireless communications. As the term implies, CDMA is a form of multiplexing, which allows numerous signals to occupy a single transmission channel, optimizing the use of available bandwidth. The technology is used in ultra-high-frequency (UHF) cellular telephone systems in the 800-MHz and 1.9-GHz bands. CDMA employs analog-to-digital conversion (ADC) in combination with spread spectrum technology. Audio input is first digitized into binary elements. The frequency of the transmitted signal is then made to vary according to a defined pattern (code), so it can be intercepted only by a receiver whose frequency response is programmed with the same code, so it follows exactly along with the transmitter frequency. There are trillions of possible frequency-sequencing codes, which enhances privacy and makes cloning difficult. The CDMA channel is nominally 1.23 MHz wide. CDMA networks use a scheme called soft handoff, which minimizes signal breakup as a handset passes from one cell to another. The combination of digital and spread-spectrum modes supports several times as many signals per unit bandwidth as analog modes. CDMA is compatible with other cellular technologies; this allows for nationwide roaming. The original CDMA standard, also known as CDMA One and still common in cellular telephones in the U.S., offers a transmission speed of only up to 14.4 Kbps in its single channel form and up to 115 Kbps in an eight-channel form. CDMA2000 and wideband CDMA deliver data many times faster.

Answered by NIKs at 10:01 AM on November 13, 2007

Code division multiple access (CDMA) describes a communication channel access principle that employs spread-spectrum technology and a special coding scheme (where each transmitter is assigned a code). In communications technology, there are only three domains that can allow multiplexing to be implemented for more efficient use of the available channel bandwidth and these domains are known as time, frequency and space. CDMA divides the access in signal space. By contrast, time division multiple access (TDMA) divides access by time, while frequency-division multiple access (FDMA) divides it by frequency. CDMA is a form of "spread-spectrum" signaling, since the modulated coded signal has a much higher bandwidth than the data being communicated. An analogy to the problem of multiple access is a room (channel) in which people wish to communicate with each other. To avoid confusion, people could take turns speaking (time division), speak at different pitches (frequency division), or speak in different directions (spatial division). In CDMA, they would speak different languages. People speaking the same language can understand each other, but not other people. Similarly, in radio CDMA, each group of users is given a shared code. Many codes occupy the same channel, but only users associated with a particular code can understand each other. CDMA is also the current name for the cellular technology originally known as IS-95. Developed by Qualcomm and enhanced by Ericsson, CDMA is characterized by high capacity and small cell radius. CDMA also refers to digital cellular telephony systems that use this multiple access scheme, as pioneered by QUALCOMM, and W-CDMA by the International Telecommunication Union (ITU), which is used in GSM’s UMTS. CDMA has been used in many communications and navigation systems, including the Global Positioning System and the OmniTRACS satellite system for transportation logistics.

Answered by alokgupta14 at 9:55 AM on November 13, 2007

Short for Code-Division Multiple Access, a digital cellular technology that uses spread-spectrum techniques. Unlike competing systems, such as GSM, that use TDMA, CDMA does not assign a specific frequency to each user. Instead, every channel uses the full available spectrum. Individual conversations are encoded with a pseudo-random digital sequence. CDMA consistently provides better capacity for voice and data communications than other commercial mobile technologies, allowing more subscribers to connect at any given time, and it is the common platform on which 3G technologies are built.

Answered by satyakam at 7:25 AM on November 13, 2007

Stands for "Code Division Multiple Access." CDMA is a wireless transmission technology that was developed during World War II by the English allies to avoid having their transmissions jammed. After the war ended, Qualcomm patented the technology and made it commercially available as a digital cellular technology. Now CDMA is a popular communications method used by many cell phone companies.

Answered by deep at 7:18 AM on November 13, 2007

Stands for "Code Division Multiple Access." CDMA is a wireless transmission technology that was developed during World War II by the English allies to avoid having their transmissions jammed. After the war ended, Qualcomm patented the technology and made it commercially available as a digital cellular technology. Now CDMA is a popular communications method used by many cell phone companies. Unlike the GSM and TDMA technologies, CDMA transmits over the entire frequency range available. It does not assign a specific frequency to each user on the communications network. This method, called multiplexing, is what made the transmissions difficult to jam during World War II. Because CDMA does not limit each user's frequency range, there is more bandwidth available. This allows more users to communicate on the same network at one time than if each user was allotted a specific frequency range. Because CDMA is a digital technology, analog audio signals must be digitized before being transmitted on the network. CDMA is used by 2G and 3G wireless communications and typically operates in the frequency range of 800 MHz to 1.9 GHz.

Answered by dinu at 7:04 AM on November 13, 2007